General
cancel
Showing results for 
Search instead for 
Did you mean: 

ITE Console parameters on HP-UX 11.11

Nicolas GIMMILLARO
Occasional Contributor

ITE Console parameters on HP-UX 11.11

Hello,

I have a visualize C3750 workstation with HP-UX 11iv1. The system console (when dtlogin is suspended) is in 7bits ASCII mode after each boot. I have to switch to 8 bits mode (numlock/config keys/terminal config/...) to have a working console.

How can I make 8 bits setting the default ?

Thanx
1 REPLY
Dennis Handly
Acclaimed Contributor

Re: ITE Console parameters on HP-UX 11.11

I'm not sure you can. For a HP terminal there was a "save config" button where you could do that but the ITE probably doesn't emulate that.