General
cancel
Showing results for 
Search instead for 
Did you mean: 

Identify the newly allocated LUN from HP Enterprise Virtual Array

Sridhar
Occasional Contributor

Identify the newly allocated LUN from HP Enterprise Virtual Array

Hi

     I have luns allocated from HP Enterprise Virtual Array to my HPUX box. Is there any command to list the LUNS for identify the newly allocated LUN. As same as in xpinfo or evainfo commands..? 

 

 

disk 1601 64000/0xfa00/0x51 esdisk CLAIMED DEVICE HP HSV450

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Identify the newly allocated LUN from HP Enterprise Virtual Array

A current version of evainfo should work, but try this

 

# scsimgr -p get_attr all_lun -a hw_path -a device_file -a wwid -a serial_number

 

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Chirag Parikh
Frequent Advisor

Re: Identify the newly allocated LUN from HP Enterprise Virtual Array

Ya that's a good question...scsimgr wont work on 11.11 and previous version. Then how to find the new LUN's in that scenario? HP UX server does not have evainfo script as client is not ready to put any scripts on server.

 

Thanks & Regards,

Chirag Parikh.