Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

Install Oracle 10g RAC ( CRS ) HPUX

Nabil_11
Frequent Advisor

Install Oracle 10g RAC ( CRS ) HPUX

Hi All,
I need to install oracle10g on HPUX with MC/serviceGuard Ext. for RAC.
with the following configuration:
I configure MC/serviceGuard and create cluster
from the two nodes db1 db2,
then I create two packeges instance1 instance2 each package run only on one member
instance1 run on db1, instance2 run on db2
also I prepare shared raw devices
I create vg_rac thats include all the database files and this vg also contains the OCR registry and votes shared raw device
I have in /etc/hosts
172.16.1.1 db1 db1.ssc.gov.jo ( public IP)
10.10.10.1 heartdb1
172.16.1.10 vdb1 ( instance1 )
172.16.1.2 db2 db2.ssc.gov.jo ( public IP )
10.10.10.2 heartdb2
172.16.1.20 vdb2 ( instance2 )
vdb1 and vdb2 IP Address userd by the MC/serviceGuard packages instance1 and instance2.
I strart my cluster it run without errors also my packages run with no errors.
I try to install Oracle CRS while the cluster and packages running but at the end it gives me error on VIP
I need to know if my configuratin as HPUX cluster and packages correct or not,
also which VIP ( Vertual IP )I should use
the IP generated by instance1 and instance2 packages or IP address that CRS will create


Regards

Please Advice
5 REPLIES
Ranjith_5
Honored Contributor

Re: Install Oracle 10g RAC ( CRS ) HPUX

Hi,

Attached the doc for 9.2.0.1 RAC. procdure must not be different for 10g.

Regards,
Syam
Ranjith_5
Honored Contributor

Re: Install Oracle 10g RAC ( CRS ) HPUX

Hi,

Just go through the following thread as well.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=964486

Regards,
Syam

Re: Install Oracle 10g RAC ( CRS ) HPUX

HI read the doc
Best Rgs
Alex
Nabil_11
Frequent Advisor

Re: Install Oracle 10g RAC ( CRS ) HPUX

Thanks for all,

BUT I need to know if I should create packages
to release the IP address or I should let CRS release these IP's

I successfully Install CRS and Oracle Database
but without MC/ServiceGuard Packages
Just The Cluster running.
I dont know if this scenario correct or NOT

Also I have another two RP servers I need to install Oracle Internet Application Server.
on same environment MC/ServiceGuard Ext. For RAC

Please Advice.



Nabil_11
Frequent Advisor

Re: Install Oracle 10g RAC ( CRS ) HPUX

10x for all
I have alot of CRS Installation Documantation
Till now I didnt have clear answer about using
the IP addresses generated by the MC/ServiceGuard packages or oracle CRS Services

Regards

Nabil