General
cancel
Showing results for 
Search instead for 
Did you mean: 

Install PSP 7.51 on Proliant DL380 with RHEL4-U3 (x86_64)

Install PSP 7.51 on Proliant DL380 with RHEL4-U3 (x86_64)

on the next reboot immediatly after Proliant Support Pack 7.51 installation, kudzu sugests the removal of a few drivers (i believe they are beeing supresed by the new ones provided by PSP). In both cases, ie removing or keeping it, the server hangs on boot with the following message: "Enabling swap space:"
Any explanation? Should PSP be applyed or just leave the original drivers from RH.