HPE Community
Operating System - Linux
1753519 Members
4844 Online
108795 Solutions
New Discussion юеВ

Re: Installation Issue on Visualize C3600

 
Andrew Kaplan
Super Advisor

тАО11-15-2004 03:53 AM

тАО11-15-2004 03:53 AM

Installation Issue on Visualize C3600

Hi there --

I am trying to install Debian 3.0 and have encountered the following problem. After interrupting the boot process and specifying the CD-ROM as the boot source, the workstation appears to display a core dump onscreen. Once that occurs, the only option is for me to power off the system. Has anyone seen this, and know how to get around it? Thanks.
A Journey In The Quest Of Knowledge
0 Kudos
Reply
2 REPLIES 2
Steven E. Protter
Exalted Contributor

тАО11-15-2004 06:17 AM

тАО11-15-2004 06:17 AM

Re: Installation Issue on Visualize C3600

Possible causes:

1) Bad media, try another cd
2) Bad cd-rom drive or connector(correct)
3) Inappropriate media, ie i386 media in a pa-risc system or vice versa.
4) Other hardware issues, such as bad memory and cpu.

It would be helpful to know if it has an os on it and does that os work. Also what the OS is.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Reply
Johannes Krackowizer_1
Valued Contributor

тАО11-16-2004 02:12 AM

тАО11-16-2004 02:12 AM

Re: Installation Issue on Visualize C3600

hi andrew,

the c3600 is a pa-risc workstation so you need the pa-risc iso images you can not boot from a i386 or any other iso image.

did you check the checksums (md5)? are the downloads correct?

best regards,

johannes
"First off, I'd suggest printing out a copy of the GNU coding standards, and NOT read it. Burn them, it's a great symbolic gesture." (Linus Torvalds)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.