Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing 10g R2 client on HP-UX 11.31 Itanium

Mike Whorley
Occasional Advisor

Installing 10g R2 client on HP-UX 11.31 Itanium

Guys,

I'm trying to instal the 10g R2 client to run on HP-UX itanium 11.31.

The kit in this location only seems to be available for 11.23 :-

http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201hpiasoft.html

From instal guide :-

4 Checking the Software Requirements

The system must meet the following minimum software requirements.

■ The operating system version must be HP-UX 11i v2 (11.23).

I've tried to run the installer but unsurprisingly if doesn't like to O/S version.

Checking installer requirements...

Checking operating system version: must be B.11.23. Actual B.11.31
Failed <<<<

Has anyone found an oracle 10g client for 11.31 or a workaround to this probelm ?

TIA,
Mike.
1 REPLY
Mike Whorley
Occasional Advisor

Re: Installing 10g R2 client on HP-UX 11.31 Itanium

Found some further info...

"Incidentally looking at the notes for 10g on 11.31/IA64 I note that you need to use the option -ignoreSysPreReqs with the installer, and must make sure that PHKL_35936 is installed. I expect that would hold true for PA-RISC as well"