General
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing Red Hat 4.5 64bit on ProLiant 360 G6

Riccardo Bedini
Occasional Visitor

Installing Red Hat 4.5 64bit on ProLiant 360 G6

Which is the correct procedure to install Readhat 4.5 64bit on Proliant 64 bit with smart array P410 RAID controller?

Thank You
3 REPLIES
P Muralidhar Kini
Honored Contributor

Re: Installing Red Hat 4.5 64bit on ProLiant 360 G6

Hi Riccardo,

Check the following link -
http://www.centos.org/docs/4/4.5/rhel-ig-x8664-multi-en-4/index.html

Regards,
Murali
Let There Be Rock - AC/DC
Steven E. Protter
Exalted Contributor

Re: Installing Red Hat 4.5 64bit on ProLiant 360 G6

Shalom,

Current procedure is to use the hardware based firmware to set up the raid disk before starting the OS install.

Also, the G6 is only certified on RHEL 4.7 or above. So you need to use the right OS release. Older versions of RHEL lack the drivers needed to access disk on the G6 server family.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Riccardo Bedini
Occasional Visitor

Re: Installing Red Hat 4.5 64bit on ProLiant 360 G6

Hi Shalom,

The raid disk is configured as RAID 1+0 properly.
The matter is that after the language selection I can't go on cause it seems that RedHat doesn't recognize the any driver.