LH6000r, integrated NetRaid

[Dmitry Melekhov_2]

Hello!

How to monitor state of this megaraid?

As I see Linux (Suse 7.2) doesn't write something about drive failure and array reconstruction to console. logs or /proc.

But I need to know that drive died ;)

How to solve this problem?

[Paulo A G Fessel]

You should get MegaMgr from the following address:

http://megaraid.lsilogic.com/support/dlcenter/mega115.tgz

Then you unpack this file and use megamgr to know about the state of the drives of your array.

HTH
Paulo Fessel

[Dmitry Melekhov_2]

Sorry, this is not what I want.
I need something like daemon (if kernel can't do it) which will write to log about array state or send e-mail to admin...

[Paulo A G Fessel]

OK, so check this other link:

http://support.dell.com/us/en/filelib/download/jump.asp?fileid=R28825&format=34381&location=2&sid=&os=Windows_NT&devid=&type=

Among the files within the tar file you've downloaded, there's a "megamon" RPM. I think it does what you want.

Good Luck,

Paulo Fessel

[Dmitry Melekhov_2]

Thank you!

Looks likethis is what I need.
(Didn't triyed yet)

[Paulo A G Fessel · Accepted solution]

Ooops, seems that the link is garbled. Here's the correct one (I hope):

http://support.dell.com/us/en/filelib/download/index.asp?fileid=R28825

Here you'll find a tar file that contains the megamon RPM. Although it is said that will only work for Dell adapters, it has successfully found my HP NetRAID adapter.

HTH
Paulo Fessel