Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

M/C Service Guard - Brocade to Cisco Migratiom

karthkri
Advisor

M/C Service Guard - Brocade to Cisco Migratiom

Hi all,

This is ragrding M/C service guard with 2 node cluster. Node 1 &2. Currently i have node - node 1 as primary wheer my package runs. the other node- node 2 is passive.

We are changing the SAn switch from brocade to cisco and the deviice file will get changed. In normal scenario i know vgexport and vgimport with map file is enough and ive done in the past.

Now what all the configuration chnages that we have to perform in this case the other node - node2. We will chnage the device files for the cluster node also at the same time. But should i do an export of map file from node1 to node also in this case.

Suggest what has to be done, should i re apply the configuration across the other node. here we are nit editing any thing with lvm nor we are removing any pv's or lv'.. sugegst....thanks all....