Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

Message: Can`t Open Display on HP-UX 10.20

Ludovit Zlaty
Occasional Visitor

Message: Can`t Open Display on HP-UX 10.20

I have a HP9000 station with HP-UX 10.20, together with X-Terminal HP ENVIZEX.
I have installed Samba+Patch (PHCO_20441). Samba is running now OK, but the
X-Terminal during starting of 3D-2D TriCAD ap. reports: Can`t open display. All
outher aplications starting OK on the X-Term.
1 REPLY
Highlighted
user not active
Frequent Advisor

Re: Message: Can`t Open Display on HP-UX 10.20

Sounds as if the application EITHER cannot establish the xterminals DISPLAY,
try exporting it first : export DISPLAY= :0.0

nb make sure hostname resolution & xterminal configuration is set correctly.

OR either hosts or user based access is playing a part : try running xhost + ?
check the Xerrors (Xservers log file) for details & reference vs. man X and the
X authority section ... any signs of MIT Magic cookies ?