cancel
Showing results for 
Search instead for 
Did you mean: 

NPAR need to shutdown

Sathesh Kumar T
Occasional Visitor

NPAR need to shutdown

Hi Team,

I am having issue with NPAR cell board, to replace the new board, I want to shutdown all VPARs and NPAR. That NPAR is having four VPARs.

I am not sure, which order to shutdown VPARs and NPAR. any one can help me the procedure to shutdown all partitions

Thanks

Sathesh
5 REPLIES
Ganesan R
Honored Contributor

Re: NPAR need to shutdown

Hi Sathesh,

Refer the below threat. Will give the answer.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1051192
Best wishes,

Ganesh.
Torsten.
Acclaimed Contributor

Re: NPAR need to shutdown

First shutdown every vPar, e.g. with

# shutdown -h -y 0

After this, only the vpmon is running - now it's safe to power off the nPar.

If you have a single nPar only, you can simply power down the server.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
sujit kumar singh
Honored Contributor

Re: NPAR need to shutdown

hi for all the vpars that ar running.

1) vaprstatus on any vpar -- check which Vpars 1re running .

2) shutdown applicastions on an individual VPAR.
3) shutdon the vPAR OS. shutdown -hy 00
4)repeat sreps 2 and 3 for all the VPARS.
5)system shall at the MON> Prompt.
6)do a control B to access the Complex GSP
7)CM>PC choose the NAPR to power off



Sujit
Sathesh Kumar T
Occasional Visitor

Re: NPAR need to shutdown

Hi All,

My problem is get resolved, Thanks for your useful help.

I am closing this question.

Thanks & Regards,

Sathesh

Sathesh Kumar T
Occasional Visitor

Re: NPAR need to shutdown

Thanks to all..,