HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Net-SNMP Installation

 
SOLVED
Go to solution
GBR
Regular Advisor

Net-SNMP Installation

Hi,

I have installed the Net-SNMP software on one of my HP-UX 11.11 servers a quite a while ago. Now, I need to confirm if the package I installed was for the right model. Does any know how I can confirm this?

The package I would have installed would have been one of the following:
1. net-snmp-5.4-1-HP-UX_B.11.00_9000_712.tar.gz
2. net-snmp-5.4-1-HP-UX_B.11.11_9000_800.tar.gz

The thing is I think I might have installed the 9000_712 package on the 9000_800 server by accident and I need to confirm this.

Thanks in advance for you help,
GBR
5 REPLIES
James R. Ferguson
Acclaimed Contributor

Re: Net-SNMP Installation

Hi:

I assume that this would have been installed by 'swinstall'. Hence, use 'swlist' to view.

Regards!

...JRF...
GBR
Regular Advisor

Re: Net-SNMP Installation

The package was not installed by swinstall. It was installed by:

tar â xvf packagename.tar

GBR
GBR
Regular Advisor

Re: Net-SNMP Installation

It was installed by:

tar -xvf packagename.tar

GBR
Solution

Re: Net-SNMP Installation

>I need to confirm if the package I installed was for the right model. Does any know how I can confirm this?

If you used tar, you'll need to extract the files to another location and compare a few files with cksum(1).
You could also use diff(1) and diff -r to compare directories.

You could list the files and sizes on the two tar files and then find which are different and compare to what you have installed.
GBR
Regular Advisor

Re: Net-SNMP Installation

Thanks.