Operating System - HP-UX
1751712 Members
5572 Online
108781 Solutions
New Discussion юеВ

Re: NetApp OnTap 7.3.5 support on HP-UX 11i V1

 
Kellah S. Berube
Occasional Contributor

NetApp OnTap 7.3.5 support on HP-UX 11i V1

Is NetApp OnTap supported on HP-UX 11i V1.
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: NetApp OnTap 7.3.5 support on HP-UX 11i V1

IMHO you should ask this question to netapp.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Kellah S. Berube
Occasional Contributor

Re: NetApp OnTap 7.3.5 support on HP-UX 11i V1

Good suggestion. We have. I am trying to cover all the bases.
Wim Rombauts
Honored Contributor

Re: NetApp OnTap 7.3.5 support on HP-UX 11i V1

On http://now.netapp.com/matrix (if you have a support account) you can easily check.

I added the support matrix for HP-UX 11i v1, Ontap 7.3.5 and FC protocol

Re: NetApp OnTap 7.3.5 support on HP-UX 11i V1

Well there's what NetApp qualify, and then there's what HP qualify:

http://www.hp.com/products1/serverconnectivity/mass_storage_devices.html#NetAppsFC

If you just look at what NetApp qualify you will get only "reasonable effort" support out of HP for any disk related issues you may experience on your 11iv1 server.

HTH

Duncan

I am an HPE Employee
Accept or Kudo