Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Oracle import process

Highlighted
zxcv
Super Advisor

Oracle import process

Hi ,

 

We are having rx6600 box with 16gb ram , 32gb virtual memory , 4 cpu

oracle 9i . 11iv2 O.S

We are trying to import two tables each with 10 milliion records.

with eva 4k and 20 hdd of 300gb disk and 16 hdd of 146gb disk.

The import process is  slow.

solid performance issue i guess.

Can some tuning be done

3 REPLIES
zxcv
Super Advisor

Re: Oracle import process

PFA disk report

Khairy
Esteemed Contributor

Re: Oracle import process

hi zxcv,

this is pure IO issue. in sar output, wio value exceed 30%. That show you have IO bottleneck.

12:39:51 %usr %sys %wio %idle
12:39:56 17 13 64 7
12:40:01 28 15 50 7
12:40:06 21 14 59 7
12:40:11 26 13 53 8
12:40:16 22 9 60 9

high IO utilization are coming from these LUNs.
c1t3d7 100.00 0.72 1453 28319 0.18 2.60
c1t3d1 92.80 0.58 620 36535 0.15 7.32

there is no easy way to do this but you need to spread your IO to multiple LUNs. That would ease your IO load.

Creating a stripe volume across multiple LUN is also good at this moment.

//
Jean-Luc Oudart
Honored Contributor

Re: Oracle import process

Hi

could you supply some extra information ?

=> Where are the source files located ? (or is it one export file for both tables)
      Please specify if one or two files.

=> Is database on same disk as files above ?
      Can you move export file elsewhere ?

=> could you supply oracle import parameter files ?
      eg. do you rebuild indexes on the fly or have you specified INDEXES=N ?

     values for parameters COMMIT, BUFFER, FULL

 

Regards

Jean-Luc

fiat lux