cancel
Showing results for 
Search instead for 
Did you mean: 

Primary disk replacement failure

SOLVED
Go to solution

Primary disk replacement failure

Working on a L3000-8x (rp5430 ?) and the primary boot disk has failed.
Found out when a did a reboot and saw it was booting up of the Alternate boot disk.
Also checked EMS poutpur to confirm the disk was bad and it was.

Disk in question isa HP 36.4GB MAM3367MC

My question is:-

Is this hot-swappable? and if it is will it sutomatically sync up with the alternate boot disk or do I have to go through the process of creating the mirrors back on the primary ?
5 REPLIES
Kenan Erdey
Honored Contributor
Solution

Re: Primary disk replacement failure

Hi,

yes it's hot swap. For procedure please refer this this - everthing about disk failure- document:

http://docs.hp.com/en/5991-1236/When_Good_Disks_Go_Bad.pdf

Kenan.
Computers have lots of memory but no imagination
Robert-Jan Goossens
Honored Contributor

Re: Primary disk replacement failure

Is this hot-swappable? Yes

and if it is will it sutomatically sync up with the alternate boot disk or do I have to go through the process of creating the mirrors back on the primary ?

You will have to create the mirror yourself. The steps are listed in this document.

http://docs.hp.com/en/5991-1236/When_Good_Disks_Go_Bad.pdf

Best regards,
Robert-Jan
Jeeshan
Honored Contributor

Re: Primary disk replacement failure

Gokul Chandola
Trusted Contributor

Re: Primary disk replacement failure

Hi,
You have to put new samconfiguration disk it will automatically sync.
Otherwise you have to create fresh mirror.

Regards,
Gokul Chandola
There is always some scope for improvment.
Gokul Chandola
Trusted Contributor

Re: Primary disk replacement failure

Hi,
Reboot required.

Regards,
Gokul Chandola
There is always some scope for improvment.