cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML110 G2 and Suse9.1

Harald_9
Occasional Visitor

ProLiant ML110 G2 and Suse9.1

Hi,

does anybody know where to find a SATA driver / module for the ProLiant ML110 G2 to use under Suse Linux 9.1 ?

Thanks
3 REPLIES
Steven E. Protter
Exalted Contributor

Re: ProLiant ML110 G2 and Suse9.1

If Suse does not support SATA off the boot cd's then you have a few paltry choices:

1) You can get a disk preparation cd from HP, boot off that and prepare the disks. This will include drivers for SATA and Suse if such drivers exist.

2) Punt and find a distribution that supports the hardware at boot.

SATA is pretty new and support isn't complete right now.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Sergejs Svitnevs
Honored Contributor

Re: ProLiant ML110 G2 and Suse9.1

Suse 9.1 uses a 2.6 kernel and should support all current commonly used SATA controllers.

Regards,
Sergejs
xyko_1
Esteemed Contributor

Re: ProLiant ML110 G2 and Suse9.1

Hi Harald,

HP does not oficialy support SuSe 9.1 on ML 110, it only supports SuSe Enterprise.

Here you can find all drivers for suse enterprise, if everything fails I guess you may try use those drivers with your suse 9.1.

http://h18023.www1.hp.com/support/files/server/us/locOsCat/1110.html

But, if you can, by a copy of SLES 9 to be fully compatible.

Regards,
Xyko