Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML350 G6 (Smart Array 410i) and SLES9 with 2.6.5-7.97 kernel

Pascal Weger
Occasional Visitor

ProLiant ML350 G6 (Smart Array 410i) and SLES9 with 2.6.5-7.97 kernel

Hello,

I'm trying to install a pre-built SLES9 with 2.6.5-7.97 Kernel on a ProLiant ML350 G6 with a Smart Array 410i HBA (2x SAS 2,5" HDD).
I only found drivers for SLES10 and SLES11 on the HP SmartStart CD, on the HP-Website I found drivers for the Smart Array 410i HBA, but only for Kernel 2.6.5-7.191 and above. I tried to use the cciss.ko module but it gave me an "insmod: error inserting 'cciss.ko': -1 Invalid module format" error.

Is there any driver for installing a 410i HBA on SLES9 / 2.6.5-7.97 Kernel? I need to get it working... Any help or information would be appreciated.

Thank you for reading,

regards

Pascal
2 REPLIES
Shiraj Fernando
Regular Advisor

Re: ProLiant ML350 G6 (Smart Array 410i) and SLES9 with 2.6.5-7.97 kernel

Hi Pascal,

Please find the drivers for Smart Array 410i at the following URL:

http://tinyurl.com/y4ft8k2

You will find SLES 9 listed.

Cheers.
Shiraj
Pascal Weger
Occasional Visitor

Re: ProLiant ML350 G6 (Smart Array 410i) and SLES9 with 2.6.5-7.97 kernel

Hello,

but Kernel 2.6.5-7.97 is not supported by this drivers... Thats the problem! Any further suggestions?

Greets
Pascal