Problem WARM C7F0

[Christian Jurado_1]

Hello Gurus i have a problem with a K100 servant at the time of boot does not find my Vg01 I have dealed with it boot from the ISL and it appears to me following error WARM C7F0

As I can recover that Volume gruop Vg01

Thanks

[Victor BERRIDGE · Accepted solution]

Hi,
You seem to have some serious problem, I would contact your HP support:
WARN C7F0 An error occurred reading IPL
HP 9000 K-Class Servers: System Initialization Codes
DocId: KCKBCA00000578 Updated: 9/27/04 7:43:00 AM
PROBLEM

***For information only***

If your system halts with any of the following front panel display codes, please contact the HP Response Center.
RESOLUTION

Ostat = Operating state. The Ostat values are as follows:

* OFF
* FLT (fault)
* TEST
* INIT (initialize)
* SHUT (shutdown)
* WARN (warning)
* RUN
* ALL

Code = Chassis (error) code



All the best
Victor

[Ron Irving]

It looks like you may have a problem with the root drive. The error points to error reading ipl. The boot information is corrupt. Do you have a good ignite tape handy?

regards,

ron