General
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem during boot and install HPUX 11.31 on IVM

SOLVED
Go to solution
Slawek Ksiazek
Regular Advisor

Problem during boot and install HPUX 11.31 on IVM

Hi

During boot install my first IVM on rx7640 i have following problem:

MCA[1]:MCA occurred!!!.
MCA[1]: lid 0x1010000
MCA[1]: iip 0xea080000000a0c00, ipsr 0x1008228012, ifa 0xea080000000beec0
MCA[1]: xip 0xea080000000beec0, xpsr 0x10100822a012, xfs 0x0
MCA[1]:The processor state register value = 0x80010000fff21120
MCA[1]:Rendezvous status information GR11 = 2
MCA[1]:mca_wakeup() procs MCA'ed 1, procs rendezvous'ed 6,
procs INIT'ed 1, procs not rendezvoused 0.
MCA, IIP:0xea080000000a0c00 IFA:0xea080000000beec0

after this my system is dump, where is problem?

Slawek
8 REPLIES
Solution

Re: Problem during boot and install HPUX 11.31 on IVM

it woul dhelp if you told us what version of IVM, the VM configuration, and what you are using to do the install of the Guest OS.


My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Slawek Ksiazek
Regular Advisor

Re: Problem during boot and install HPUX 11.31 on IVM

Hi

I use T2767AC A.03.50 Integrity VM

Slawek
sreekanthtm
Trusted Contributor

Re: Problem during boot and install HPUX 11.31 on IVM

At which stage ur getting the error?. Are you able to get in to LVM configuration menu?.
Slawek Ksiazek
Regular Advisor

Re: Problem during boot and install HPUX 11.31 on IVM

bash-3.2# hpvmstatus -P IVM1
[Virtual Machine Details]
Virtual Machine Name VM # OS Type State
==================== ===== ======= ========
IVM1 107 UNKNOWN Off

[Authorized Administrators]
Oper Groups:
Admin Groups:
Oper Users:
Admin Users:

[Virtual CPU Details]
#vCPUs Entitlement Maximum
====== =========== =======
1 10.0% 100.0%

[Memory Details]
Total Reserved
Memory Memory
======= ========
2 GB 64 MB

[Storage Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
dvd scsi 0 0 0 0 0 file /home/sksiazek/Images/HPUXv3_DVD1.iso

[Network Interface Details]
Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address
========= ========== ========== ======= === === === =================

[Misc Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
serial com1 tty console
bash-3.2# hpvmstatus -P IVM0
[Virtual Machine Details]
Virtual Machine Name VM # OS Type State
==================== ===== ======= ========
IVM0 106 UNKNOWN Off

[Authorized Administrators]
Oper Groups:
Admin Groups:
Oper Users:
Admin Users:

[Virtual CPU Details]
#vCPUs Entitlement Maximum
====== =========== =======
1 5.0% 100.0%

[Memory Details]
Total Reserved
Memory Memory
======= ========
1 GB 64 MB

[Storage Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
disk avio_stor 0 2 0 0 0 disk /dev/rdsk/c4t0d1
dvd scsi 0 4 0 0 0 file /home/sksiazek/Images/HPUXv3_DVD1.iso

[Network Interface Details]
Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address
========= ========== ========== ======= === === === =================
vswitch avio_lan vswlan7 1 0 0 0 26-55-71-cc-87-7a
vswitch lan localnet 1 0 1 0 c2-d8-e6-e9-25-cb

[Misc Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
serial com1 tty console
Slawek Ksiazek
Regular Advisor

Re: Problem during boot and install HPUX 11.31 on IVM

I see also in /var/adm/syslog.log

MCA[1]:REVISION:0004
MCA[1]:SEVERITY:0
MCA[1]:Processor Error Device Info decode begins.
MCA[1]:VALIDATION_BITS = 0x000000000110000f
MCA[1]:PSP = 0x80010000fff21120
MCA/CMC[1]: uarch check. info:0x0080000000004001
MCA/CMC[1]: req:N/A res:N/A
MCA/CMC[1]: tgt:N/A ip:N/A
MCA[1]:PSI_STATIC_STRUCT.VALID_FIELD_BITS=0x000000000000001f
MCA[1]:Processor Error Device Info decode ends.

MCA[1]:Platform Specific Non I/O error
MCA[1]:Platform Specific Data = 0x0
MCA[1]:Error Status val = 0x0
MCA[1]:Error Status type = NO DATA
MCA/CMC[1]:handler = OS_MCA, sub_type = Generic
MCA/CMC[1]:00 00 00 00 00 00 20 05 e0 00 00 00 00 29 98 80
MCA/CMC[1]:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
MCA/CMC[1]:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Slawek
Slawek Ksiazek
Regular Advisor

Re: Problem during boot and install HPUX 11.31 on IVM

I see this information before menu,
Slawek Ksiazek
Regular Advisor

Re: Problem during boot and install HPUX 11.31 on IVM

(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.035

Press Any Key to interrupt Autoboot
AUTO ==> boot :IINSTALL
Seconds left till autoboot - 9
- - - - - - - - - - - - Live Console - - - - - - - - - - - - 0
AUTOBOOTING...> System Memory = 2042 MB
loading section 0
............................................................................................ (complete)
loading section 1
............... (complete)
loading symbol table
loading ram disk file (:IINSTALLFS).
.....................................................................................................................
(complete)
Launching :IINSTALL
SIZE: Text:46898K + Data:7618K + BSS:23918K = Total:78435K

Calling function e00000000107d900 for Shutdown State 8 type 0x4


MCA[1]:MCA occurred!!!.
MCA[1]: lid 0x1010000
MCA[1]: iip 0xea080000000a0c00, ipsr 0x1008228012, ifa 0xea080000000beec0
MCA[1]: xip 0xea080000000beec0, xpsr 0x10100822a012, xfs 0x0
MCA[1]:The processor state register value = 0x80010000fff21120
MCA[1]:Rendezvous status information GR11 = 2
MCA[1]:mca_wakeup() procs MCA'ed 1, procs rendezvous'ed 6,
procs INIT'ed 1, procs not rendezvoused 0.
MCA, IIP:0xea080000000a0c00 IFA:0xea080000000beec0

*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

*** The dump will be compressed.
*** To change this dump type, press any key within 10 seconds.
*** Proceeding with compressed dump
*** The dump will be a SELECTIVE dump: 2198 of 32700 megabytes.
*** To change this dump type, press any key within 10 seconds.
*** Proceeding with selective dump.
Slawek Ksiazek
Regular Advisor

Re: Problem during boot and install HPUX 11.31 on IVM

I make mistake I forget add device trough hpvmdevmgmt â a rdev:/dev/rscsi/c?d? now all is ok, thanks a lot for assistance.


Slawek