Operating System - HP-UX
1753622 Members
5568 Online
108797 Solutions
New Discussion юеВ

Re: Problem with rx5670, Crash

 
Anton Nosov
New Member

Problem with rx5670, Crash

Hello. We've got the problem with server. Server are crashed and after reboot I found this message in log file. Can you help me? What's that?

Jun 1 05:03:41 hp-uxserver01 vmunix: Boot device's HP-UX HW path is: 0/0/2/0.2.0
Jun 1 05:03:41 hp-uxserver01 vmunix:
Jun 1 05:03:41 hp-uxserver01 vmunix: System Console is on the Built-In Serial Interface
Jun 1 05:03:41 hp-uxserver01 vmunix: igelan0: INITIALIZING HP A6794-60001 PCI 1000Base-T at hardware path 0/1/1/0/4/0
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:REVISION:0002
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:SEVERITY:1
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:Processor Error Device Info decode begins.
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:VALIDATION_BITS = 0x000000000110102f
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:PSP = 0xa8000000fff21330
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:The error was isolated but not contained.
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]: cache check. info:N/A
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]: req:N/A res:N/A
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]: tgt:N/A ip:N/A
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]: bus check. info:0x0080000000000060
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]: cache check. info:N/A
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]: uarch check. info:0x0080000000003001
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:PSI_STATIC_STRUCT.VALID_FIELD_BITS=0x000000000000003f
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:Processor Error Device Info decode ends.
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]: req:N/A res:N/A
Jun 1 05:03:44 hp-uxserver01 above message repeats 3 times
Jun 1 05:03:41 hp-uxserver01 vmunix:
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]: tgt:N/A ip:N/A
Jun 1 05:03:44 hp-uxserver01 above message repeats 3 times
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:PCI I/O Component Error
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:Hardware Path = 0/3/1/0
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]:handler = OS_MCA, sub_type = Generic
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]:00 00 00 00 00 00 20 02 e0 00 00 00 00 22 c7 00
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]:00 03 00 03 01 00 a0 00 e0 00 00 01 1d c0 d2 68
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]:00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 08
Jun 1 05:03:41 hp-uxserver01 vmunix:
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:PCI Mercury Bus Error
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:Bus ID = 0x60
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:Error Type = 0x1
Jun 1 05:03:41 hp-uxserver01 vmunix:
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:Error Status val = 0xe1600
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:Error Status type = ERR_PARITY Bus parity error (must also set the A, C, or D Bits).
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]:handler = OS_MCA, sub_type = Generic
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]:00 00 00 00 00 00 20 04 e0 00 00 00 00 22 c6 c0
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]:00 60 00 01 01 00 a0 00 00 00 00 00 00 60 08 00
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA/CMC[0]:00 00 00 00 fe d2 60 00 00 00 00 40 76 83 a6 b0
Jun 1 05:03:41 hp-uxserver01 vmunix:
Jun 1 05:03:41 hp-uxserver01 vmunix: Logical volume 64, 0x3 configured as ROOT
Jun 1 05:03:41 hp-uxserver01 vmunix: Logical volume 64, 0x2 configured as SWAP
Jun 1 05:03:41 hp-uxserver01 vmunix: Logical volume 64, 0x2 configured as DUMP
Jun 1 05:03:41 hp-uxserver01 vmunix: Swap device table: (start & size given in 512-byte blocks)
Jun 1 05:03:41 hp-uxserver01 vmunix: entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Jun 1 05:03:41 hp-uxserver01 vmunix: Dump device table: (start & size given in 1-Kbyte blocks)
Jun 1 05:03:41 hp-uxserver01 vmunix: entry 0000000000000000 - major is 31, minor is 0x2000; start = 826228, size = 4194300
Jun 1 05:03:41 hp-uxserver01 vmunix: Starting the STREAMS daemons-phase 1
Jun 1 05:03:41 hp-uxserver01 vmunix: Create STCP device files
Jun 1 05:03:41 hp-uxserver01 vmunix: Starting the STREAMS daemons-phase 2
Jun 1 05:03:41 hp-uxserver01 vmunix: $Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Jun 1 05:03:41 hp-uxserver01 vmunix: Memory Information:
Jun 1 05:03:41 hp-uxserver01 vmunix: physical page size = 4096 bytes, logical page size = 4096 bytes
Jun 1 05:03:41 hp-uxserver01 vmunix: Physical: 8381808 Kbytes, lockable: 6125152 Kbytes, available: 7180052 Kbytes
Jun 1 05:03:41 hp-uxserver01 vmunix:
Jun 1 05:03:41 hp-uxserver01 vmunix: NOTICE: vxvm:vxdmp: added disk array OTHER_DISKS, datype = OTHER_DISKS
7 REPLIES 7
Anton Nosov
New Member

Re: Problem with rx5670, Crash

/etc/shutdownlog

Reboot after panic: MCA, IIP:0xe00000000073a760 IFA:0x6000000000406320
Michal Kapalka (mikap)
Honored Contributor

Re: Problem with rx5670, Crash

hi,

check

/var/adm/crash

/var/tombstones

collect information from MP ( event log ) =>

filter majority => 3

check /etc/shutdownlog

check /var/adm/syslog/OLDsyslog.log (syslog.log)

....

of course if you have valid HP contract, contact your ASM, and open a HW call, the will analyze the crashdump and toombstones if are presented.

reference could be also this page :

http://www.hpux.ws/?p=83


mikap
Prasanth V Aravind
Trusted Contributor

Re: Problem with rx5670, Crash

Jun 1 05:03:41 hp-uxserver01 vmunix: igelan0: INITIALIZING HP A6794-60001 PCI 1000Base-T at hardware path 0/1/1/0/4/0
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:REVISION:0002
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:SEVERITY:1
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:Processor Error Device Info decode begins.
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:VALIDATION_BITS = 0x000000000110102f
Jun 1 05:03:41 hp-uxserver01 vmunix: MCA[0]:PSP = 0xa8000000fff21330


it seems some issue on server LAN/SCSI I/O PCI board on path 0/1/1/0/4/0

Remove this card & try for reboot.

GUdlcuk
Prasanth
Anton Nosov
New Member

Re: Problem with rx5670, Crash

/var/adm/crach are present (~200mb)
/var/tomstones are present
shutdownlog at previous message
Anton Nosov
New Member

Re: Problem with rx5670, Crash

I dont think, that is "hardware path 0/1/1/0/4/0" coz no errors at log about this hardware, only info.
Michal Kapalka (mikap)
Honored Contributor

Re: Problem with rx5670, Crash

hi,

i will werite it again, if you have valid HP contract, would open a HW call, and the HP will analyze your crash dump + mcafile.00x

mikap
Anton Nosov
New Member

Re: Problem with rx5670, Crash

kk, thx