Operating System - HP-UX
1752821 Members
4001 Online
108789 Solutions
New Discussion юеВ

Process Resource Manager dont work

 
jormarcha
Advisor

Process Resource Manager dont work

hi to all,

I have many problems whith process resource manager. I maked a new prm.conf file whith two new groups: "pruebas" and "nuevos":

PRUEBAS:1:1::
NUEVOS:2:99::

the specifications are:
- PRM C.03.04 hpux_11.23 prmconfig
- IA64, hp-ux 11i v2
- 1 GB RAM
- 1 Processor

however i can`t manage the memory and CPU resources for these groups and comands defined in to the prm.conf

attached to the configuration file

thanks in advance
5 REPLIES 5
Steven E. Protter
Exalted Contributor

Re: Process Resource Manager dont work

Shalom,

How about some error codes or logs from PRM.

Note that 1 GB of RAM is not a heck of a lot to work with these days. There may not be a lot PRM can do under the circumstances.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
jormarcha
Advisor

Re: Process Resource Manager dont work

thanks for answer so quickly,
I know about the ram but is only a test.

there isn't error codes and the syslog didn't show anything wrong, simply, when enable PRM and run some commands like "dd" or "file", the CPU cosume all the resources, the wio is higest and nothing about my configuration run correctly.

ie, the thresholds set for CPU, memory, disk and commands do not apply

thank you very much
M. Coffey
New Member

Re: Process Resource Manager dont work

This doesn't seem like a valid test of PRM. I believe that HP-UX 11i v2 itself requires about 2 GB of memory to run effectively. Activating a configuration that divides up 1 CPU and 1 GB of memory won't provide a good test of PRM's capabilities.

Also, the PRM configuration that you posted has the dd program running in the the PRUEBAS group, but that group only has 1% of the available CPU resources.

The PRM User's Guide, available at http://docs.hp.com/en/B8733-90025/index.html, includes a chapter on how PRM manages resources, both CPU and memory.
jormarcha
Advisor

Re: Process Resource Manager dont work

seems logical but doesn't found minimum requirements to working with PRM. So, I will try out in another machine whith any more resources.

I thought that this threshold for the program dd could compare the values of the system performance before and after applying the settings and verify that the system would not be so affected.

thanks a lot

jormarcha
Advisor

Re: Process Resource Manager dont work

thanks to closed