Proliant 1500

[H. Peters]

Pentium 1 100 - P54C
onboard memory base 16 Mb
Extended 64 Mb
Total 80Mb

System reports only 16Mb
OS: Unix/NetBSD 2.0 - RC5

--------------------------------------
dmesg
--------------------------------------
NetBSD 2.0_RC5 (GENERIC) #0: Sat Nov 13 06:28:51 CET 2004
tecneeq@ascent:/home/tecneeq/builds/NetBSD-2.0_RC5-i386-obj/sys/arch/i386/compile/GENERIC
total memory = 15996 KB
avail memory = 7944 KB
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium (P54C) (586-class), 100.23 MHz, id 0x52c
cpu0: features 1bf
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
Compaq Triflex Host-PCI Bridge (miscellaneous prehistoric, revision 0x01) at pci0 dev 0 function 0 not configured
siop0 at pci0 dev 10 function 0: Symbios Logic 53c825 (fast wide scsi)
siop0: interrupting at irq 10
scsibus0 at siop0: 16 targets, 8 luns per target
rtk0 at pci0 dev 12 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 9
rtk0: Ethernet address 00:40:f4:9a:e3:39
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
esiop0 at pci0 dev 14 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 5
scsibus1 at esiop0: 16 targets, 8 luns per target
pceb0 at pci0 dev 15 function 0
pceb0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x04)
eisa0 at pceb0
eisa0: can't map I/O space for slot 7
isa0 at pceb0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: disk fixed
sd0: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors
sd0: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: disk fixed
sd1: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors
sd1: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
sd2 at scsibus0 target 2 lun 0: disk fixed
sd2: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors
sd2: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
cd0 at scsibus1 target 5 lun 0: cdrom removable
cd0: async, 8-bit transfers
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
cd0(esiop0:0:5:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present

cd0(esiop0:0:5:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present

wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
cd0(esiop0:0:5:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present