MSA Storage
1747993 Members
5229 Online
108756 Solutions
New Discussion юеВ

Re: SAN(FC) Storage does not work with VmWare

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

Re: SAN(FC) Storage does not work with VmWare

No picture attached.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: SAN(FC) Storage does not work with VmWare

Select ACCESS CONTROLL (SSP) in the upper row and check which servers have access.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Rasputinko
Occasional Advisor

Re: SAN(FC) Storage does not work with VmWare

ou ou ouuu, after grant access, finaly new server see the storage. JUCHUU

https://s18.postimg.org/vt8oxxcmx/server_3_working.png

Thank you very much my friend!!

Now even solve a IBM storage and job will be done :)

Once again, THANK YOU

Rasputinko
Occasional Advisor

Re: SAN(FC) Storage does not work with VmWare

Yet just one more question. Event show error redudancy path failed. Its a big problem or not? It is possible to cause a reset one HP SAN switch at the beginning?

https://s12.postimg.org/9hwdy8e0d/MSA_error_redudance.png