SMH on RHEL 5

[Christian B.]

Hi All,

I have a Proliant Server running RHEL5, Im unable to use SMH.I tried http://ipaddress:2381 but nogo.How do i check if SMH is installed correctly or what else should i check.

Thank in advance

[David Claypool]

Is your firewall enabled? If so, you need to allow port 2381.

[Christian B.]

Thanks for the reply David I haved checked the Firewall settings and have allowed port 2381.
How do i check if SMH is installed and how do i reinstall SMH again.

[Sameer_Nirmal]

You can check if the SMH installed on the system using

# rpm -qa | grep -i smh

If the SMH is already installed, you can check it's log /opt/hp/hpsmh/logs/smh.log

You can install the latest version of SMH available at http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=397634&prodNameId=3288132&swEnvOID=4006&swLang=8&mode=2&taskId=135&swItem=MTX-e85a4029b2dd42959f1f82dda7

[Christian B.]

Thanks i think reinstalling SMH resolved the issue, btw can we launch SMH from CLI ?

[Sameer_Nirmal]

SMH on Windows and Linux doesn't provide text based interface, just web based interface.

On HP-UX, it does provide text based interface besides web based interface.

[Matti_Kurkela]

If you have installed the hp-health driver package, you should have the "hpasmcli" command available. It allows command-line access for some of the features of SMH.

See "man hpasmcli" for more information.

MK

[Christian B.]

Thank you