Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Suse 9.2 on ZV5000

Carl Reeds
Occasional Visitor

Suse 9.2 on ZV5000

I am having trouble with the video on my system. I've got the "64MB NVIDIA(R) GeForce(TM) 4 440 Go + 1394" graphics card and "15.4" WXGA BrightView Widescreen (1280x800)" screen. When I try to configure the system to use these the screen doesn't display correctly. The right hand portion of the screen displays black for a 1.5 inch strip from top to bottom and approximately 1/2 inch of the bottom display as a smear. I've found one other person having this problem on the NVidia forum, but no one over there hase been able to assist with correcting the problem.
1 REPLY
Alex_382
Occasional Visitor

Re: Suse 9.2 on ZV5000

Hi Carl,

Try the following:

edit /etc/X11/xorg.conf

Add the "Modeline" entry on the monitor section with the values shown below (double check the specs of your monitor for Horizontal and Vertical sync):

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "WXGA BrightView"
HorizSync 31.5 - 90.0
VertRefresh 60.0 - 60.0
Option "dpms"
ModeLine "1280x800" 98.9 1280 1352 1488 1696 800 801 804 833 -hsync +vsync
EndSection

On section "Screen" add "1280x800" on Modes, so you have something like:

Modes "1280x800" "1024x768" "800x600"

Let me know if it works.

Alex