Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
cancel
Showing results for 
Search instead for 
Did you mean: 

TC1100

Giacomo Cariello
Occasional Visitor

TC1100

Hello,
I'm the author of the messages found on sourceforge. I'm interested in developing the kernel drivers for the digitizer. I'd only need some specs ;-). If HP could possibly share any info, it would be cool.
3 REPLIES
Steven E. Protter
Exalted Contributor

Re: TC1100

You looking for Linux or HP-UX information.

Your reuqest needs to be more specific to get help.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
SureshKumar_2
Valued Contributor

Re: TC1100

Hi

In the following u will get the technical documentation of Device drivers - how to for HPUX kernel.

http://h21007.www2.hp.com/dspp/topic/topic_DetailSubHeadPage_IDX/1,4946,1-10303-TECHDOCUMENT-40106,00.html

Hope this meets ur requirement

suresh
Things are very easy, when u know about it...
Stuart Browne
Honored Contributor

Re: TC1100

Umm, fella's... He's talking about the TC1100 Tablet computer, running Linux.

He's responded in other threads re this topic:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=518090

The developers of the affected modules (Wacom on linux, http://linuxwacom.sourceforge.net/ ), of which Giacomo is one of the contributers, can't get the TC1100 to work, as it behaves differentnly than the TC1000 predecessor.

Giacomo, I'm afraid I don't know if the specs are available online for these models. The last thread I replied too on this subject just went to the 'linuxwacom' project pages unfortunately.

You'll have to contact HP directly, but I'm not sure which division would help with this sort of request.

Sorry.
One long-haired git at your service...