BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
General
Showing results for 
Search instead for 
Do you mean 

TRU64-unix 5.1A cluster crashed

Occasional Visitor

TRU64-unix 5.1A cluster crashed

I have cusomer with 2 DS25 in cluster and 1 server crashed ,The server with UNIX 5.1A ( REV 1885 ) and cluster 1.6
The error that I got in crash dump is:

luster alias subsystem enabled
MEMORY CHANNEL API - initializing
Environmental Monitoring Subsystem Configured.

trap: invalid memory read access from kernel mode

faulting virtual address: 0x0000000000000000
pc of faulting instruction: 0xfffffc000065d1f4
ra contents at time of fault: 0xfffffc0000de3fcc
sp contents at time of fault: 0xfffffe0544ec74c0

panic (cpu 1): kernel memory fault
syncing disks... dump device name: dsk21-01, num: 0x130015d, off: 0x10, len: 0x5dc000

LSM attempting to dump to device at major 19 minor 349

dump device name: dsk1b-01, num: 0x1300288, off: 0x0, len: 0x5dc000

LSM attempting to dump to device at major 19 minor 648

"'
Any idea what cause the server to crash?
3 REPLIES
Honored Contributor

Re: TRU64-unix 5.1A cluster crashed

+

If the system was able to reboot after the crash, there should be a recent crash_data.x in /var/adm/crash/ then please post that here.
The posted output is not sufficient to determine a possible cause for the crash.

Rgds.
\ Johan.

+

_JB_
Occasional Visitor

Re: TRU64-unix 5.1A cluster crashed

Highlighted
Advisor

Re: TRU64-unix 5.1A cluster crashed

I see two different crashes there.
One (.9) is related to virtual memory handling and the other (.10)
does look like a issue with the aha_chim (SCSI-Adapter) - Driver.

I guess your next question is..."What can I do to avoid this ?"

There are two points that I would go for...

1-the crashed node is a AlphaServer DS25 running on Firmware: 6.8-18
the most recent Firmware is Version 7.3 ! See:
http://h18002.www1.hp.com/alphaserver/firmware/readmes/ds25.html
I would go for a update of the Firmware.
(Don't forget to check the other node for this too !)

2-if you have to stay on 5.1A, well...go and look if you have all
additional early release patches installed, if not get and install them.
http://h30097.www3.hp.com/unix/EarlyReleasePatch-download.html

Better would be a consideration if you can go/upgrade to 5.1B-5
but that is only my humble opinion.

Greetings,
--Uwe.