Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
cancel
Showing results for 
Search instead for 
Did you mean: 

To send EMS SNMP trap to Tivoli

Movin Shah
Contributor

To send EMS SNMP trap to Tivoli

Hello All,

I want to configure SNMP trap for EMS which will in turn talk with Tivoli management Framework & give an alert. The trap dest. ip address i hv given is of Tivoli server(a SUN machine).

Can someone pl. tell me after enabling the EMS for say eg. Lan Card(lan0) for snmp through SAM what else i need to configure on HP-UX side & then on the Tivoli sevrer.

Regards
Movin
1 REPLY
Jeff_Traigle
Honored Contributor

Re: To send EMS SNMP trap to Tivoli

You need to specify the trap-dest in /etc/SnmpdAgent.d/snmpd.conf. Restart the SNMP daemons.

Tivoli side you need to specify the traps to look for. According to the EMS documentation, it uses the following traps:

EMS_NORMAL_OID 1.3.6.1.4.1.11.2.3.1.7.0.1
EMS_ABNORMAL_OID 1.3.6.1.4.1.11.2.3.1.7.0.2
EMS_RESTART_OID 1.3.6.1.4.1.11.2.3.1.7.0.3
--
Jeff Traigle