Operating System - HP-UX
1753377 Members
5199 Online
108792 Solutions
New Discussion юеВ

Unable to install Oracle 8.0.6 on HP102

 
SOLVED
Go to solution
Waltina L. DiPaolo
Occasional Contributor

Unable to install Oracle 8.0.6 on HP102

I have pfs mounted an oracle 8.0.6 CD for our dba group to install on a HP 9000/813 running 10.20 using the pfs mount instructions contained in document KBAN00000197 on the knowledge base. The dba tried to launch the install and received the following message:

oracle@dmc17% ./orainst
A problem occurred with the Oracle Installer. Try reinstalling it from original ORACLE distribution media. Or, you can provide the following message to Support to debug the problem:
User Interface Failure: Window System Startup
Result: User Interface Failure: Window System Startup

I've tried the following:
running orainst from XWindows
export TERM=hp (& vt220)
export ORACLE_TERM=hp (& vt220)

nothing has worked so far. Any other suggestions? I have a call open with oracle, but could take awhile to get response.

-TD

Can't have your cake and eat it too
6 REPLIES 6
harry d brown jr
Honored Contributor

Re: Unable to install Oracle 8.0.6 on HP102

Is your DISPLAY variable set?

live free or die
harry
Live Free or Die
Jon Mattatall
Esteemed Contributor

Re: Unable to install Oracle 8.0.6 on HP102

We install from a telnet session-
start X-window emulator and-
export DISPLAY=:0.0

Jon
A little knowledge is dangerous - none is absolutely terrifying!!!
A. Clay Stephenson
Acclaimed Contributor
Solution

Re: Unable to install Oracle 8.0.6 on HP102

Hi:

A few simple tests first:

After you export DISPLAY and run a telnet session, does something like xclock or xterm run? If so, your DISPLAY is setup. If I remember correctly, you need to run orainst under hpterm with TERM set to hp and with ORACLE_TERM set to hp as well. In the worst case, you should still be able to install using the character interface - just leave off the \m. The character interface still worlks under 8.0.6 but 8.1.x requires the GUI.

If it ain't broke, I can fix that.
Waltina L. DiPaolo
Occasional Contributor

Re: Unable to install Oracle 8.0.6 on HP102

my display variable is set. I can run/display/use SAM without issue.

-TD
Can't have your cake and eat it too
Wodisch
Honored Contributor

Re: Unable to install Oracle 8.0.6 on HP102

Hello TD;

when you write that you can run SAM you do that BEFORE (or AFTER) su-ing to oracle, right?
Hence the user "oracle" still might not have set this variable, and/or might not have PERMISSION to show a window on your (i.e. "root") display!
execute "xhost +" before doing the "su - oracle", export the DISPLAY variable and THEN start teh installer.

HTH,
Wodisch
Waltina L. DiPaolo
Occasional Contributor

Re: Unable to install Oracle 8.0.6 on HP102

That rocks.

Thanks - the installation is running now.

TD
Can't have your cake and eat it too