Urgent: oracle rac 10g on Vpar ,hp-ux 11.23 with xp storage 24k

[prakashckesavan]

Hi All,

I have two rx 7640 servers with two npar created.One npar is having three vpars on both server.I am using one vpar from each server to build Oracle RAC 10g.OS version is 11.23 and vpar provider version is 11.23.01.04.
and the shared luns are presented from xp24k storage to both server.

while we running root.sh script it was success in primary node , but it fails in secondary node with the following error

Waiting for the Oracle CRSD and EVMD to start

Timed out waiting for the CRS stack to start

with Regs
Prakash

[Johnson Punniyalingam]

does your '/u01/app/oracle/product/10.2.0' owned by root ..?

can you check your directory permission

ll -ld /u01/app/oracle/product/10.2.xx

Thanks,
Johnson

[Johnson Punniyalingam]

also please help to try below

1. Use a dedicated Switch for the Cluster Interconnect.
2. Set the Cluster Interconnetc MTU=1500 (f.e. change later to MTU=9000).
3. Add only two Cluster Nodes to the CRS with the initial installation and add the other Nodes with addNode.sh Script seperately to the Cluster.

Thanks,
Johnson

[prakashckesavan]

Hi,

we are installing cluster in the path.'/u01/crs/oracle/product/10.2.0

please find the full error

#sh root.sh
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured

Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node :
node 1: ractl0v3 ractl0v3c ractl0v3
node 2: ractr0v3 ractr0v3c ractr0v3
clscfg: Arguments check out successfully.

NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
ractl0v3
ractr0v3
CSS is active on all nodes.
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Timed out waiting for the CRS stack to start.

Thank you
Prakash

[prakashckesavan]

Hi John,

I are not sure about switch as we are doing it remotly. we will try to get the information and update you

Is it mandatory ? It looks so but still some doubt.

Is there any thing we need to do to acess xp storage in 11.23 on vpar. Any thing for Lun persistancy like we do in Linux..?

Can we check from Os side that whether we are in same switch or not?any method..

Thank you
Regards