cancel
Showing results for 
Search instead for 
Did you mean: 

Vectra QS/16S setup disk

Jeremy Kapp
Occasional Visitor

Vectra QS/16S setup disk

Hello, I still use My Hewlett Packard Vectra QS/16S machine (386)

...but it gives Me the error message "invalid configuration, run setup...and the hard-drive don't work.

Can You please tell Me how I can get a copy of this disk?

This machine is very important to Me...Thank You...Jeremy Kapp

16 REPLIES
Jamie Hughes
Honored Contributor

Re: Vectra QS/16S setup disk

Hello,

The Vectra QS was discontinued in 1992 and is no longer supported. I found what I believe to be the setup/BIOS disk for the QS/20 and that should work for your machine. If you want to post your email address, I will send it to you. There are no guarantees that this will work and it is not supported by HP so you will have to use it at your own risk. Please let me know if you want the file and what email address to send it to.

Best regards,
Jamie Hughes
Jeremy Kapp
Occasional Visitor

Re: Vectra QS/16S setup disk

Yes Please, I would love a copy of this disk.

My email is mjkapp@home.com

...any more info You can give Me on this old computer would be greatly appreciated...Thanks...Jeremy Kapp
MEYER_1
Occasional Visitor

Re: Vectra QS/16S setup disk

Hello,

I have got the same problem with my Vectra QS 16S PC, can someone help me....
I know that it's an old PC, but I need it.
The message that I have show me:
"invalid configuration, run setup"

My email address is:
sebenstage@hotmail.com
Sebastien
Kent Ballance
Occasional Visitor

Re: Vectra QS/16S setup disk

Me too! I need a Vectra QS/16S setup disk. Please email me at kent.ballance at bdk.com
Sumit_9
Occasional Visitor

Re: Vectra QS/16S setup disk

i am having the same problem...
did anyone find a solution to this?
John Erickson_2
Occasional Visitor

Re: Vectra QS/16S setup disk

I also need a copy of the set up disk for a QS/20 for a piece of manufacturing equipment.
thx.
John Erickson_2
Occasional Visitor

Re: Vectra QS/16S setup disk

e-mail is john.erickson@guidant.com
Uwe Wagner
Occasional Visitor

Re: Vectra QS/16S setup disk

Hi

I am also searching for a setup/bios-disk for a qs16/s(386/16Mhz). Maybe someone can send me the software on it to my email-adress???

looking forward to a solution of my problem

Uwe
Uwe Wagner
Occasional Visitor

Re: Vectra QS/16S setup disk

Hi here
Its Uwe again

I forgot my email: uwe.wagner@hamburg.de
regards

Uwe

mayoral
Occasional Visitor

Re: Vectra QS/16S setup disk

Hello, I still use My HP Vectra QS/20 machine (386)

but it gives Me the error message "invalid configuration, run setup...and the hard-drive don't work.

This machine is very important to Me

thanks in advance

MAYORAL:ma1569@YAHOO.COM.TW
Uwe Wagner
Occasional Visitor

Re: Vectra QS/16S setup disk

Hi Jeremy

I´ve got now the original Disk from HP, I can send the Data on it via email. Give me yRegards
Uwe
pandini giusepp
Occasional Visitor

Re: Vectra QS/16S setup disk

i need a copy of this please too!
g.panda@tin.it
thanks very much
gary fontanarosa
Occasional Visitor

Re: Vectra QS/16S setup disk

I have an HP vectra QS/16S also and would a setup disk if you can email it to me. My mail address is gfont@aol.com. I would really appreciate it.

Gary
robecker950
Occasional Visitor

Re: Vectra QS/16S setup disk

If somebody could email the contents of the setup disk I would so so appreciate it! My email address is rbecker@counterclockwisemusic.net

thanks in advance,
Bob
fjllopis
Occasional Visitor

Re: Vectra QS/16S setup disk

Hello, I still use My Hewlett Packard Vectra QS/20 machine

...but it gives Me the error message "invalid configuration, run setup...and the hard-drive don't work.

Can You please send Me a copy of this disk?

My E-mail is fjllopis@empretal.com

Thank You...
Javier Llopis
SalvoLG
Occasional Visitor

Re: Vectra QS/16S setup disk

Hello All,

I've a Vectra QS/16S computer, but I would need the setup disk. Could you please send me it to my address? It's salvo dot lg80 at gmail dot com.

 

In addiction can you tell me how can enter the bios of this machine? I've tried with all F keys and DEL, but no joy.

 

I thank you in advance!

 

Best Regards,

Salvo