Where to get LINUX for home?

[AlienRoadShow]

Got several PC's. All pentium save one AMD K6.

1 - Will LINUX work on them?

2 - Is there a list of supported LINUX PC's somewhere?

3 - What flavor of LINUX should I put on my PC? (* Redhat, SUSE?, other? *)

4) What version of what flavor?

4 - Should I put FREEBSD on my PC's instead?

(* TEN POINTS FOR ALL!!! *)

[Jean-Pierre Denis · Accepted solution]

Hi,

1) Linux run on almost anything so yes it will work on it.

2) Go on the linux version you are interested with and look for the HCL ( hardware compatibility list) This will list all the hardware and tell you if it's supported or not.
( ex: http://www.mandrakelinux.com/en/hardware.php3 )

3) I'm a Mandrake Advocate but RedHat and suse are also pretty good...

4) I suggest that you start with Mandrake/Redhat and then later you could give BSD a try.

Thanks,
JP

[John Poff]

Hi,

1. Almost certainly. I scrounge up old machines at work that have been discarded because they won't run the latest versions of Windows, and I install Linux on them. They run great.

2. Here is a hardware compatibility list for Red Hat:

http://hardware.redhat.com/hcl/

3. I'm a fan of Red Hat but the others are good as well. I've also worked with SuSE, but just on a mainframe.

4. I suggest getting Red Hat 9. Each version of Red Hat seems to get better and better and I've loaded RH 9 on several boxes without a hitch.

5 or 4a) I'd load Linux first and get comfortable with it, and then tackle FreeBSD.

JP

[Steven E. Protter]

Linux will run on almost anything, including many machines not on the hardware list.

Things to avoid:

laptop's with unapproved/untested video systems. Lots and lots of itrc posts and very few resolutions. Have to write your own drivers there, most don't have the time or patience.

NIC cards not on the list.

I don't know how many Linux installations fail because of some dorky NIC card that nobody every heard of. There are lots of good ones. Almost anything Intel ever built works, Bay Networks PCI cards have also servered me very well.

Back in the 6.x days, I tried Red Hat with a linksys card, loads of trouble. I'd avoid Linksys because there is a lot of variance in the cards themselves. Bought a lot of them in 1997 and there were three different chipsets and drivers needed. They may have resolved this issue, but I put my surplus cards in Windows Boxes. Hardware support there is still better.

I'd also avoid totally no-name video cards. If the video card doesn't work, you can get one that does for $30.

Linux has an easier install program than Free BSD. Free BSD requires a real nuts and bolts person. You pick the packages, figure out the dependencies and really build a system from scratch. I like checkboxes, call me lazy.

Are you going to cluster the boxes or do anything cool, or are you just learning networking with the setup?

SEP

[AlienRoadShow]

A) Even with my old Pentium 133, something like, 11 years old PC?

B) I've heard kernel loading problems nightmares with LILO, GRUB, etc. How does this work? Which one? Additional purchase?

C) How similar is LINUX to HP-UX install?

D) How similar is FREEBSD to HP-UX install?

E) Even with my AMD (* piece of junk from HP *) K6? (* The 133 runs better! *)

[AlienRoadShow]

At CompUSA I see HOME and a Professional editions. Which to get and what differences?

(* Any place else to get LINUX besides CompUSA? I hate CompUSA after their tech manager blew my video card up years ago, on the 133, and then loaded my PC with the Monkey virus for complaining to his boss. *)

[Balaji N]

hi,
you have got many answers. but neverthless, still will add my few paise.

linux runs on most of the old hardwares. your catch will be the problems with video display / network drivers as SEP has pointed out. all you need to do is to check if they are supported.

the first thing which you need to decide is the distro which you are going to run. i would suggest you to start with RedHat (my personal preferance) or Mandrake (have heard that this is very user friendly), all assuming that you are a new user or the machines are for people new to linux. After you are comfortable, you could move to some source based distro like gentoo or even Slack / BSD. But if you are newbie and if you try BSD, i guess you are going to have a good (!@#$) time.

and regarding you latest post.

A. Yes. even if it is a age old P133 it will work. have heard people running Linux on 486 as well. But in that case i would suggest you to have some older versions of the distro as well just in case you run into problems.


B. No. In the Linux world, you have the freedom to choose any software and most of them come free (as in beer). The older versions of Bios / Lilo doesnt support booting from hard disks where the boot record is 1024 cylinders and above (Gururs, Correct me if i am wrong.). So, you might need to install Lilo on the MBR. and based on your inputs, i assume that only linux is going to run on these boxes. so it's not going to be a problem.

C. The installation of RedHat is just click and go. If you talk of the installation similarities, they are somewhat similar. Both ask for the Language, Keyboard type, Partition Stuff, S/W Selection, N/W config, etc. But in HP, you specify most of them in a single screen and in redhat, they are over a series of screens.

D. Sorry. havent ever seen FreeBSD.

E. I guess yes.


And last, if you are going to run a set of boxes for your personal use, try if you could setup LTSP, The Linux Terminal Server. You could get a good box with a decent configuration and set it up as a sever and then all the other stone-age boxes boot of this.

and keep us posted.
-balaji (good morning. a very long post)

[Steven E. Protter]

Your questions with answers where I know them:

A) Even with my old Pentium 133, something like, 11 years old PC?
If you put in enough memory, Linux will run fine on that box.

B) I've heard kernel loading problems nightmares with LILO, GRUB, etc. How does this work? Which one? Additional purchase?
LILO and GRUB come with, GRUB is more modern, becoming the standard, all controlled by one text file.

C) How similar is LINUX to HP-UX install?
Very different. HP-UX is guided, similar to Red Hat. FreeBSD is write your own cookbook. I did it once, did not like the results.
D) How similar is FREEBSD to HP-UX install?
See answer C
E) Even with my AMD (* piece of junk from HP *) K6? (* The 133 runs better! *)
There have been instances of AMD processors not running Linux right, but to find out you'll have to install.

On some of the HP Pavillion boxes, Linux doesn't detect drive geometry correctly, limiting the amount of usable space on drives bigger than 2 GB. The problem is with the BIOS.

SEP

[Claudio Cilloni]

I'm using RedHat 7.3 for my desktop machine at work, and RedHat 9 for my home pc. I also use RedHat 7.3 installed on a 486/100MHz with 48MB ram and it works great. Obviously, every cpu-bound activity make me sleep, but it isn't a linux fault ;-). I use this ancient machine as data backup system and to have some fun with network applications.

I think that 7.3 is still the best version of RedHat, but I'm trying to change my mind. If SEP says to use RH 9, believe to him (look at the towel on his head ;-)

I installed FreeBSD some months ago, and it was a little bit difficult operation. I played with it for some days, but I didn't find reasons to use it for a desktop use. Maybe it could be a good idea for a firewall/mail server/web server; someone says that FreeBSD has better performance/reliability than linux.

Ciao
Claudio

[AlienRoadShow]

What is difference between home and professional versions?