Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

Win2003 host and San Sufer problem

Mikhail_4
Occasional Contributor

Win2003 host and San Sufer problem

Hello,
we have a problem with a host connecting to VA7410 in SAN with StorageWorks SAN Switch 2/16 EL:
when using SAN Surfer to configure paths to LUNS (preferred and alternate),
only one path is seen, although we have 2 controllers on VA, and the LUN is located on 2-nd RG, but host sees that LUN through the 1-st (alternate) RG. Through the port of 2-nd RG host can see only LUN 0.
Trying to reconfigure it manually or automatically doesn't help - the host just doesn't see them at all.
Does anyone know anthing about this ?
2 REPLIES
Martin P.J. Zinser
Honored Contributor

Re: Win2003 host and San Sufer problem

Hello Mikhail,

don't know about this, but I do know that you are more likely to get an answer to this question in the Win 2k3 forum over at

http://forums1.itrc.hp.com/service/forums/categoryhome.do?categoryId=278

than here in the Linux forum ;-)

All the best,

Martin
Mikhail_4
Occasional Contributor

Re: Win2003 host and San Sufer problem

sorry for the mistake :)