XF86Config HP 11i C8000 "ATI Fire GL X3 color"

[SupraTeam_1]

Hi,
I have a problem with my workstation HP-UX 11i C8000.
When I launch an application my CDE environment graphic fails and CDE exit.

The same test with same OS on C3750 or C3600 it's OK.

The only difference is the graphic model of card:
"ATI Fire GL X3 color 0x0 48 planes"

My /etc/X11/XF86Config :
...
Section "Monitor"
Identifier "Monitor 0"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 75.0
Gamma 1.02

# DPMS is not enabled by default. Uncomment the following line to
# enable it.

#Option "DPMS" "on"
EndSection

#
# There may be multiple Device sections. This section is used to specify
# parameters for the graphics device. The Identifier string must match
# the Device string in the active Screen section for this device to be
# in use. See the GAG for more options that may be set for this particular device.
#
Section "Device"
Identifier "Console"
Devicefile "/dev/gvid"
Option "DefaultVisualTrueColor" "True"
EndSection

#
# There may be multiple Screen sections. The Identifier string must match
# the Device string in the active ServerLayout section for the Screen to
# be active.
#
Section "Screen"
Identifier "Screen 0"
Device "Console"
Monitor "Monitor 0"

#
# Set the default depth.
#
DefaultDepth 24

#
# The subsection associates a buffer depth with a screen size.
#
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection



Idea ????

Thank you

[Robert-Jan Goossens]

Hi,

are there any errors in the /var/dt/Xerrors, /.dt/errorlog or the /var/X11/Xserver/logs/Xf86.0.log files?

reagrds,
Robert-Jan

[Steven E. Protter]

Shalom,

The graphics card must be certified or it will never work right.

"ATI Fire GL X3 color 0x0 48 planes"

Check http://docs.hp.com for the C8000 also http://partsurfer.hp.com

SEP

[Robert-Jan Goossens]

Btw please do not open a new thread if you add info, just add the info to one thread.

[SupraTeam_1]

This my /var/X11/Xserver/logs/Xf86.0.log:

(II) fglrx(0): UMM area: 0xc8c08000 (size=0x073f8000)
(II) fglrx(0): driver needs XFree86 version: 4.2.x
(II) fglrx(0): detected XFree86 version: 4.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:4:0:0"
(II) fglrx(0): [drm] added 4096 byte SAREA at 0x4d0aa440
(II) fglrx(0): [drm] mapped SAREA 0x4d0aa440 to c03fb000
(II) fglrx(0): [drm] framebuffer handle = 0xc8000000
(II) fglrx(0): [drm] added 2 reserved contexts for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 2.6.0
(II) fglrx(0): Date: Jun 10 2005
(II) fglrx(0): Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xd0030000
(II) fglrx(0): [agp] Mode=0xff00031a bridge: 0x0000/0x0000
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0xff00031a
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x2f000312)
(II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): fast BLT buffer addr=0xc2792000, phys=0x00928000, size=0x00014000 bytes
(II) fglrx(0): [drm] texture shared area handle = 0x4d0aaac0
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): back buffer: 0xc8c08000
(II) fglrx(0): depth buffer: 0xcf3f8000
(II) fglrx(0): front overlay: 0xc9810000
(II) fglrx(0): back overlay: 0xc9b12000
(II) fglrx(0): video overlay: 0xc9e14000
(II) fglrx(0): FBADPhys: 0xc8000000 FBMappedSize: 0x00c08000
(II) fglrx(0): ----------------------------------
(II) fglrx(0): | panel native mode is 1600x1200 |
(II) fglrx(0): ----------------------------------
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,2464)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 1432
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Driver provided FillSolidRects replacement
Driver provided FillSolidSpans replacement
Driver provided WritePixmap replacement
Driver provided ReadPixmap replacement
Setting up tile and stipple cache:
32 128x128 slots
19 256x256 slots
(II) fglrx(0): Acceleration enabled
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse disabled
(II) fglrx(0): X context handle = 0x00000002
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Setting vga for screen 0.
(II) Initializing built-in extension XTEST1
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/hid/mouse_000"
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Loaded keymap USB_PS2_DIN_US_English from file /etc/X11/XHPKeymaps
(**) Option "Device" "/dev/hid/kbd_000"
(II) Using keyboard device file "/dev/hid/kbd_000"

more .dt/errorlog
*** ERROR(4): dtsession: PID 7566: Tue Dec 23 14:40:10 2008
Invalid root window. Can not save client information.
*** [114]

An idea

[SupraTeam_1]

And /var/dt/Xerror...
Tue Dec 23 14:40:10 2008
error (pid 2839): Server for display tmpcae1:0 terminated unexpectedly 0

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Build Operating System: HP-UX B.11.11 U 9000/785
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/X11/Xserver/logs/Xf86.0.log", Time: Tue Dec 23 14:40:10 2008
(==) Using config file: "/etc/X11/XF86Config"