BladeSystem - General
1748186 Members
4461 Online
108759 Solutions
New Discussion юеВ

Re: c3000, fan speed 100%!

 
SOLVED
Go to solution
hogust
Advisor

c3000, fan speed 100%!

hi! i have a problem. today all 6 fans in enclosure increase their speed to 100% and continue keep it.
I read on the internet that the reason may be the absence of OA. Can our OA out of order, or lost link with enclosure?
If i reset OA affect it on the servers?
Can it help me?
7 REPLIES 7
Johan Guldmyr
Honored Contributor

Re: c3000, fan speed 100%!

Hi, yes, the OA can be reseated safely. (most of the time..).

Check out firmwares as well.

Any problems reported in the OA?
hogust
Advisor

Re: c3000, fan speed 100%!

OA reports no problem. If reset OA will help it reduce fan speed?
Johan Guldmyr
Honored Contributor

Re: c3000, fan speed 100%!

Maybe.
hogust
Advisor

Re: c3000, fan speed 100%!

Ok i reset the OA it helped for a few seconds. And then fan speed increase to 100 % agaian. what to do next?
Johan Guldmyr
Honored Contributor
Solution

Re: c3000, fan speed 100%!

I would check the firmwares.. are you running a supported set?

http://h18004.www1.hp.com/products/blades/bladesystemupdate.html#3

This can besides firmware be caused by a blade server having some kind of issues, a blank not installed, obvious room temperature/airflow issues.
hogust
Advisor

Re: c3000, fan speed 100%!

problem was in one of servers. As soon as I turn it off, fan speed decrease to 28 percents. just in case I have updated the ilo firmvare on all servers. now it works perfectly.
Bart_Heungens
Honored Contributor

Re: c3000, fan speed 100%!

This is a known issue with ILO firmware 1.81 and is solved from 1.82 on...
So yes please update firmware to 1.82 for all ILO's and at least 2.60 or higher for the OA...
Good luck
--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !