cannot accept connection to the port oserr 233

[Vineet Mehrotra]

The memory utilization was ok when this problem occurred. We have around 1GB free memory on the system and recently we added memory on the box so I don't think this is a memory issue.

Also there is no commands like oncheck -cl on informix. Are you talking about onstat -c.

How to see how many RSTs are coming?

[Navin Bhat_2]

Sorry typed it wrong. It is to verify the indexes "oncheck -cI", sounds strange but I have seen this happen.

[Vineet Mehrotra]

We run the oncheck utility every weekend and it completes successfully every time. Don't see any integrity issue in the database.

[Navin Bhat_2]

You can use tools like nettl (man nettl) for detailed transport analysis. You may want to call in to hp support for further help. But basically I would think this is an harmless message and have the application folks reinitiate a connection when there is a abnormal disconnect.

[hari jayaram_1]

Vineet,

If you have added memory and if you have so much free memory then that cannot be the issue. I would like some more information.
Can you cut and paste your /stand/system. Also if you can do a "swlist -l fileset -a state > /tmp/patch" and attach the copy. Please remove everything which might identify your server.

[Vineet Mehrotra]

Hi Hari,

Here is the tunable parameters value from /stand/system

* Tunable parameters

STRMSGSZ 65535
max_thread_proc 66
maxdsiz 0X08000000
maxfiles 1024
maxswapchunks 2048
maxuprc 256
maxusers 1024
msgmax 32768
msgmnb 32768
msgmni 100
msgseg 7168
msgtql 256
npty 128
nstrpty 60
num_tachyon_adapters 5
semmni 4096
semmns 16384
semmnu 2048
semume 256
shmmax 0X11FFFFFFF
shmmni 4096
shmseg 4096

Let me know if you need more information.

Also please find the patch list you asked for.

Thanks once again for all your support on this.