centos 5.3 dl380 g3

[elwin machado]

Hi TwoProc,
i did a fresh centos 4.8 install, i enable the bios with OS Selection: Select Windows 2000.
MPS Table Mode:Full Table APIC. following the instructions on those links.

here is the result

when booting, on grub i have two options

Centos (2.6.9-89.ELsmp) kernel panic when selecting this kernel

Centos-up(2.6.9-89.EL) booting without any problem.

cpuinfo
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.80GHz
stepping : 9
cpu MHz : 2786.571
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 5573.96

Thanks
Elwin

[TwoProc]

Sorry Elwin, at this point - I'm stuck right where you are.

[elwin machado]

Thanks,
what i think it could be is that Bios Firmware are bad. but i already have the latest bios update for that server.