cancel
Showing results for 
Search instead for 
Did you mean: 

cmascsid not start

Ayman Altounji
Valued Contributor

cmascsid not start

I have some problems with cmascsid . In the log file there is this message:
No SCSI controller found. can you help me?
1 REPLY
Ayman Altounji
Valued Contributor

Re: cmascsid not start

This error that you are getting is caused by the storage agent not finding the Compaq scsi controller in your server, which is probably not present in your system. This error will not stop the server from working, but if you would like the error from happening, you can stop the storage agent altogether. This agent is only used to give information on what is on the scsi bus through an insight manager snmp trap, and will not remove any functionnality on the server. You can rename /etc/rc.d/rc3.d/S99cmastor and /etc/rc.d/rc5.d/S99cmastor so the file S99cmastor to have a small 's' instead of a capital 'S' hence will be s99cmastor. If you have any further questions, feel free to call 1-800-652-6672