Operating System - HP-UX
1752790 Members
6038 Online
108789 Solutions
New Discussion юеВ

Re: connecting to the internet

 
Todd McDaniel_1
Honored Contributor

connecting to the internet

I have an ia64 11.23 server that should now have access to the internet, however, I don't know what I need to configure to get it to work.

are there any daemons that need to be running? I see the www port defined in /etc/services...

help a brother out!!
Unix, the other white meat.
4 REPLIES 4
Steven Schweda
Honored Contributor

Re: connecting to the internet

The Internet is a big place. To what is your
system connected? (And what else is
connected there?) SAM (or its descendants)
should offer basic IP network configuration.
Rasheed Tamton
Honored Contributor

Re: connecting to the internet


Hope the system is already connected to a network which can see your company proxy or ISP (through firewall), check whether you have firefox or mozilla installed:

swlist -l product|grep -Ei 'moz|fox'

which firefox
which mozilla

/opt/firefox/firefox

Otherwise, needs to provide more info. reg the system setup.
Aneesh Mohan
Honored Contributor

Re: connecting to the internet

Hi ,

If mozilla is installed then only thing needed is DNS ip in /etc/resolv.conf ,that should be enough for internet configuration.

Thanks,
Aneesh
Steven E. Protter
Exalted Contributor

Re: connecting to the internet

Shalom,


The net daemon needs to be running, which is undoubtedly running on your system.

What you need is to configure /etc/rc.config.d/netconf to have a valid and pingable gateway.

Then configure /etc/nsswtich.conf to use DNS for host name resolution, after files.

Then put your organizations DNS servers in /etc/resolv.conf

HP-UX has been internet ready for a very long time.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com