current driver does not support configuration message

[David DiBiase]

We are attempting to get an rp3440 configured to get its IP address via DHCP. When we attempt to config the NIC via SAM, we are told that the current driver does not support configuration and that we need the latest driver.

[Murat SULUHAN · Accepted solution]

Hi David

Can you submit ioscan output for network interfaces.

Best Regards
Murat

[Tim Nelson]

HPUX 11iv1, v2, or v3 w/ current patches ?
Model number of NIC card and /or ioscan ?

Try manually configuring /etc/rc.config.d/netconf
set DHCP_ENABLE[x]=1 on interface
then disable any other specific IP entries for that lan.

run /sbin/init.d/net down the net up

If you are not connected to the console when you do the above you will loose lan connectivity.

[David DiBiase]

here is the output of the ioscan. Sorry for the delay - I took a weekend break.

nsdemo02:/root# ioscan -fn | grep lan
lan 0 0/1/2/0 igelan CLAIMED INTERFACE HP PCI 1000Base
-T Core
lan 2 0/6/1/0 igelan CLAIMED INTERFACE HP A6825-60101
PCI 1000Base-T Adapter
nsdemo02:/root#

[Murat SULUHAN]

Hi David

I think your card part number replaced with A6825A. Therefore you can upgrade your driver from following urls that depends on your operating system

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=239117&prodTypeId=12883&prodSeriesId=239115&swLang=8&taskId=135&swEnvOID=7

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=239117&prodTypeId=12883&prodSeriesId=239115&swLang=8&taskId=135&swEnvOID=2080

This url is startup page for the card
http://h20000.www2.hp.com/bizsupport/TechSupport/ProdSearch.jsp?lang=en&cc=us&taskId=135∏=A6825A

I think that driver will also works for Core I/0 Ethernet, if don't works you can apply latest HW Enab. Patch bundle.

Please update us about the process.

Best Regards
Murat

[Steven E. Protter]

Shalom,

I think you need the latest bi-annual patch set and the latest HWE Hardware enablement bundle.

SEP

[David DiBiase]

Thank you both.

I like the idea of getting this machine in order. I will download and install the Gold and HWE packs and post the results