Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Showing results for 
Search instead for 
Did you mean: 

/etc/stinit.def for Ultrium-2 on Red Hat Linux

Jens Oberender
Occasional Visitor

/etc/stinit.def for Ultrium-2 on Red Hat Linux

Hi, I am looking for stinit.def settings. We have a Sun Storedge L8 (ADIC Faststor 2) carousel with an HP Ultrium-2 SCSI Drive in it. I need settings in order to get Sun Enterprise Backup Software running. The compression should be enabled.

-bash-2.05b# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 01 Id: 00 Lun: 00
Vendor: ADIC Model: FastStor 2 Rev: G12r
Type: Medium Changer ANSI SCSI revision: 02
Host: scsi0 Channel: 01 Id: 05 Lun: 00
Vendor: HP Model: Ultrium 2-SCSI Rev: F53A
Type: Sequential-Access ANSI SCSI revision: 03

Thank You!
Jens Oberender
dirk dierickx
Honored Contributor

Re: /etc/stinit.def for Ultrium-2 on Red Hat Linux

sooooo, which settings do you need? everything seems to be ready to be used since all devices are detected.