cancel
Showing results for 
Search instead for 
Did you mean: 

fbackup tape usage counting

gary weng
Occasional Contributor

fbackup tape usage counting

Does anyone know why the fbackup count the usage time from minus 1?
There is the log from fbackup.
Begin fbackup to rx66 2m Time: Thu Sep 11 02:50:59 EAT 2008

fbackup(1004): session begins on Thu Sep 11 02:50:59 2008

fbackup(3203): volume 1 has been used -1 time(s)

fbackup(3024): writing volume 1 to the output file /dev/rmt/2m

fbackup(3055): total file blocks read for backup: 27681093

fbackup(3056): total blocks written to output file /dev/rmt/2m: 28195833

End fbackup to rx66 2m Time: Thu Sep 11 04:08:40 EAT 2008

-----

Begin fbackup to rx66 2m Time: Thu Sep 11 10:35:23 EAT 2008

fbackup(1004): session begins on Thu Sep 11 10:35:23 2008

fbackup(3203): volume 1 has been used 0 time(s)

fbackup(3024): writing volume 1 to the output file /dev/rmt/2m


3 REPLIES
Robert-Jan Goossens_1
Honored Contributor

Re: fbackup tape usage counting

Hi,

Looks like a known error.

Title: fbackup(3203): volume 1 has been used -1 time(s) on 2nd fb. of new tape
Document ID: ucr_na-KMN4701414607-1

http://www12.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=ucr_na-KMN4701414607-1

Just info not a solution

Regards,
Robert-Jan
public
Regular Advisor

Re: fbackup tape usage counting

Tks Robert, Thread closed
gary weng
Occasional Contributor

Re: fbackup tape usage counting

thread close