General
cancel
Showing results for 
Search instead for 
Did you mean: 

fcmsutil & swlist - FibrChanl driver version mismatch

SOLVED
Go to solution
V.P
Frequent Advisor

fcmsutil & swlist - FibrChanl driver version mismatch

Dear Admins,

Recently we had installed Fibre channel driver in our HP-UX 11.23 servers. After the installation in some of the servers the swlist command and fcmsutil command shows difference in the driver versions.

Driver : FibrChanl-01_B.11.23.1009_HP-UX_B.11.23_IA_PA.depot

root@SystemA:/>swlist -l fileset|grep -i 'Fibre'
# FC-FCD B.11.23.1009 HP PCI-X/PCIe FibreChannel Driver(FCD)
FC-FCD.FC-FCD-KRN B.11.23.1009 Fibre Channel Driver (FCD) Kernel Library
FC-FCD.FC-FCD-RUN B.11.23.1009 Fibre Channel Driver (FCD) User Space files
# FC-TACHYON-TL B.11.23.0512 PCI FibreChannel;Supptd HW=A6795A,A5158A
FC-TACHYON-TL.FC-TL-KRN B.11.23.0512 Fibre Channel Tachyon TL/XL2 Kernel Library
FC-TACHYON-TL.FC-TL-RUN B.11.23.0512 Fibre Channel Tachyon TL/XL2 User Space Files

root@SystemA:/> fcmsutil /dev/fcd0|grep -i 'Driver Version'
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.1003.01 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Mar 1 2010,10:33:23

root@SystemA:/> fcmsutil /dev/fcd0
Vendor ID is = 0x001077
Device ID is = 0x002312
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012c7
PCI Mode = PCI-X 133 MHz
ISP Code version = 3.3.175
ISP Chip version = 3
Topology = PTTOPT_FABRIC
Link Speed = 2Gb
Local N_Port_id is = 0x010900
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x50060b0000c9b89f
N_Port Port World Wide Name = 0x50060b0000c9b89e
Switch Port World Wide Name = 0x200900051e049b57
Switch Node World Wide Name = 0x100000051e049b57
Driver state = ONLINE
Hardware Path is = 0/3/1/0/4/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.1003.01 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Mar 1 2010,10:33:23
3 REPLIES
Shibin_2
Honored Contributor

Re: fcmsutil & swlist - FibrChanl driver version mismatch

Was there any warning or errors after the driver update? Have you checked swagent log ?
Regards
Shibin
malai2000
Occasional Advisor
Solution

Re: fcmsutil & swlist - FibrChanl driver version mismatch

check what what model of card do you have and here is the link to the fibre channel drivers.

1. FibrChanl00
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=FibrChanl00

2. FibrChanl-01
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=FibrChanl-01

3. FibrChanl-02
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=FibrChanl-02

To install FibrChanl-01, you will need to install FibrChanl00 first.

To install FibrChanl-02, you will need FibrChanl00 and FibrChanl-01.
V.P
Frequent Advisor

Re: fcmsutil & swlist - FibrChanl driver version mismatch

Dear Shibin/Malai,

Sorry for the delayed response.

I haven't observed any error after the driver update. I have checked the swagent log and no abnormalities found.

I have observed that the servers which are having the 2007 drivers, fcmsutil is updated and working fine. Only for the 2005 onces we are facing the issue.

root@SystemB />swlist -l fileset|grep -i 'Fibre'
# FC-FCLP B.11.23.0712 PCIe FibreChannel
FC-FCLP.FC-FCLP-KRN B.11.23.0712 Fibre Channel FCLP Kernel Component
FC-FCLP.FC-FCLP-RUN B.11.23.0712 Fibre Channel FCLP User Space Files
# FC-TACHYON-TL B.11.23.0712 PCI FibreChannel;Supptd HW=A6795A,A5158A
FC-TACHYON-TL.FC-TL-KRN B.11.23.0712 Fibre Channel Tachyon TL/XL2 Kernel Library
FC-TACHYON-TL.FC-TL-RUN B.11.23.0712 Fibre Channel Tachyon TL/XL2 User Space Files

Anyways thanks for the response. We have logged a call with HP.

Regards,
V.P