frecover(2114)

[mehul_3]

Hi all,
I got a following error while restoration operation was going on
frecover(2114): read error from input device (I/O error)
Memory fault(coredump)
As per my observation it may be the problem of DAT. I used cleaning DAT to eliminate it but problem still persists.
Moreover, if DAT was corrupted then why it didn't alert me while taking backup.
Waiting for response..

Regards,
Mehul

[Muthukumar_5]

I hope the problem is occured after backup?! Try to check input device status before recovering.

--
Muthu

[Yogeeraj_1 · Accepted solution]

hi mehul,

can you do a small test to check if you tape drive is OK?

tar -cvf ....

(use a spare tape)

see if you get the same type of error messages

kind regards
yogeeraj

[Joel Girot]

Hi Mehul

Same kind of error here :
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=994972
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=893469
:-)

[Eric Antunes]

Hi Mehul,

Do you have the latest patches for the SCSI tape and frecover?

#swlist -l patch|grep - tape
#swlist -l patch|grep -i frecover

Please post the output...

Best Regards,

Eric Antunes

[Eric Antunes]

Hi Mehul,

Do you have the latest patches for the SCSI tape and frecover?

#swlist -l patch|grep -i tape
#swlist -l patch|grep -i frecover

Please post the output...

Best Regards,

Eric Antunes

[mehul_3]

Hi eric

pl, find an attachment

Pl, respond AEAP

Mehul

[Eric Antunes]

Hi mehul,

Sorry, I've just arrived from holidays.

Please execute the following and let me know the results:

swlist -l patch |grep -i stape|more

What is you OS version?

Best Regards,

Eric Antunes