Operating System - HP-UX
1753793 Members
7287 Online
108799 Solutions
New Discussion юеВ

Re: getting error when i use DBCA command..

 
Ramana.Sv
Frequent Advisor

getting error when i use DBCA command..

When use dbca command it will below message what is this iam not getting pls.

"Set DISPLAY environment variable, then re-run"
please help me.

Thank you,
Ramana.Sv
3 REPLIES 3
Anshumali
Esteemed Contributor

Re: getting error when i use DBCA command..

export DISPLAY=:1.0
run DBCA
you should have a X-manager or exceed running.
You can try running xclock first to test it.

Dreams are not which you see while sleeping, Dreams are which doesnt allow you to sleep while you are chasing for them!!
Yogeeraj_1
Honored Contributor

Re: getting error when i use DBCA command..

hi,

you will need a graphics - Xwindows environment because the dbca is java-based and runs on an X-windows environment.

If you have a graphics terminal, it would be easier to launch the installation from there itself.

hope this helps!

kind regards
yogeeraj
No person was ever honoured for what he received. Honour has been the reward for what he gave (clavin coolidge)
Torsten.
Acclaimed Contributor

Re: getting error when i use DBCA command..

IMHO, you have too many open threads ... this is just another. You already have a thread about this!


Install a X-Server application on your PC, for example this:

http://x.cygwin.com/

Now download putty:

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

From your PC, run

putty -X
or

putty -X -telnet


Once connected, run your X-application. The window will appear on your PC.
That's it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!