how to recovery system

[Piotr Pyda]

how to restor system from tape, step by step i have tape with make_tape_recovery.

[Stf]

Hello,

You just have to interrupt your boot process to get PDC main menu
type 'sea'
type 'bo p'
interact with IPL? n
and if you have exactly the same configuration that the server on which you made the make_tape_recovery you dosen't have anything else to do

Stf ;-)

[Robert-Jan Goossens_1]

Hi,

Check this thread.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=4399

Regards,
Robert-Jan

[Nguyen Anh Tien]

If you have already backup tape (from make_tape_recovery command). You can recover OS by following steps:
1. Reboot server.
2. Cancel auto boot at:
============================
Processor is starting autoboot.
To discontinue press a key within 10 seconds
=============================
3. scan boot tape device:
search (or sea)
--> choose boot path that corresponding tape drive.
4. Boot from tape driver:
boot PX (PX is number of boot path)
5. Doing as guide appeared on terminal.
Anh Tien

[Piotr Pyda]

thank you all