Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

hp9kcontainer: how long to wait for autofs start?

Mazarin
Occasional Visitor

hp9kcontainer: how long to wait for autofs start?

I'm running HP9000Containers v A.03.01.04. It is a new installation.

 

I've created a container of an 11.11 host using the install-from-make_net_recovery-image technique. 

 

The old server (K460) is using autofs. The container has a new hostname/ip address. 

 

How long should I wait for the AUTOFS to try to start? (I've been waiting about 4 hours.)

 

 

What is the best approach to terminating the startup? The last time I tried this, I gave up at 2 hours and then ran into problems clearing the attempt: I could neither stop nor start the container (its state was 'starting'), and ended up having to delete the container and start over from scratch.

 

thanks,

Maz

1 REPLY
Highlighted
Laurent Menase
Honored Contributor

Re: hp9kcontainer: how long to wait for autofs start?

you should collect rc.log , syslog.log  in container directory, and a nettl trace while starting, then ask to hp support.