cancel
Showing results for 
Search instead for 
Did you mean: 

hpvm Vswitch doubt

SOLVED
Go to solution
UniRock
Regular Advisor

hpvm Vswitch doubt

Hi All,

I have following setup:
OS: 11.23
HPVM Host: 1
HPVM Guest: 2 (required)
HPVM: Version A.01.20.00
Physical NIC Card: 2 (on host, both on different network)

How can I create four Vswitch (from these two NICs), assign two to each VM so that both VM will have two IPs (one from each network)?

Is this possible?

Thanks..
3 REPLIES
Kapil Jha
Honored Contributor
Solution

Re: hpvm Vswitch doubt

same link
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1422544

well there is a thumb rule
nNICs == nVswitch

rather
u can create 2 v switch and 2 virtual nics on VM and have 2 different networks.

BR,
Kapil+
I am in this small bowl, I wane see the real world......
Torsten.
Acclaimed Contributor

Re: hpvm Vswitch doubt

You create 1 vswitch per NIC, but you can assign both vswitches to each client.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
UniRock
Regular Advisor

Re: hpvm Vswitch doubt

Thank yo very much....Kapil & Torsten,

As per suggestion, I assigned both vswitch to both guests and then assigned IPs to each vswitch on each guest giving guests access to two different networks.