hpvm Vswitch doubt

[UniRock]

Hi All,

I have following setup:
OS: 11.23
HPVM Host: 1
HPVM Guest: 2 (required)
HPVM: Version A.01.20.00
Physical NIC Card: 2 (on host, both on different network)

How can I create four Vswitch (from these two NICs), assign two to each VM so that both VM will have two IPs (one from each network)?

Is this possible?

Thanks..

[Kapil Jha · Accepted solution]

same link
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1422544

well there is a thumb rule
nNICs == nVswitch

rather
u can create 2 v switch and 2 virtual nics on VM and have 2 different networks.

BR,
Kapil+

[Torsten.]

You create 1 vswitch per NIC, but you can assign both vswitches to each client.

[UniRock]

Thank yo very much....Kapil & Torsten,

As per suggestion, I assigned both vswitch to both guests and then assigned IPs to each vswitch on each guest giving guests access to two different networks.