ignite configuration

[amipankaj]

hello experts,

i have to upgrade ignite on my hpux11.11 parisc server.

i have removed the old one and installed the new C.7.3.148 on it.

can you guys please help me with process to configure it?

thanks and regards,
pankaj roy

[Steven E. Protter]

Shalom,

If you did not back up your Ignite customizations it is lost.

You might recover it from backup.

http://docs.hp.com/en/5992-5230/ch01s03.html

Loading patches using Ignite:
http://docs.hp.com/en/B2355-90153/apcs09.html

http://docs.hp.com/en/5992-3336/index.html

SEP

[amipankaj]

hi,

i just want to configure the ignite.

thanks,
Roy

[OldSchool]

configure it for *what*?

if all you do is "make_tape_recovery" then the is no configuration to be done.

do you want to set up a separate ignite server and use "make_net_recovery"?

the request needs a context...

[Gokul Chandola]

Hi,
#cd /opt/ignite/bin
#./ignite then will get option.

USE SAM for Configure.

Regards,
Gokul Chandola

[SKR_1]

You need to do following steps.

1. Setup IP address ( you can take the same machine IP )

2. Setup DHCP addresses ( you can ignore this option )

3. Set up software ( you can use this option later on in future at any time, this step is required to make an centralised depot in the same machine for the future reference )

Thanks

SKR

[amipankaj]

Thanks guys,

your comment helped alot.